OBD2 Car ScannerWhat does P062C mean?
P062C stands for Internal Control Module Vehicle Speed Performance. The engine computer has found a fault in one of its own circuits or in a circuit it controls.
Powertrain codes cover the engine, transmission and emissions. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Damaged wiring or a loose connector
- Low battery voltage or poor ground
- Faulty relay or actuator
- In rare cases, a faulty engine control module
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does P062C mean?
P062C means “Internal Control Module Vehicle Speed Performance”. It belongs to the computer and output circuits group: The engine computer has found a fault in one of its own circuits or in a circuit it controls.
Is it safe to drive with P062C?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear P062C?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- P0628Fuel Pump A Control Circuit Low
- P0629Fuel Pump A Control Circuit High
- P062AFuel Pump A Control Circuit Range/Performance
- P062BInternal Control Module Fuel Injector Control Performance
- P062DFuel Injector Driver Circuit Performance Bank 1
- P062EFuel Injector Driver Circuit Performance Bank 2
- P062FInternal Control Module EEPROM Error
- P0630VIN Not Programmed or Incompatible – ECM/PCM
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.