What does P0583 mean?
P0583 stands for Cruise Control Vacuum Control Circuit Low. The engine computer has found a problem with vehicle speed signals, idle control or another sensor input.
Powertrain codes cover the engine, transmission and emissions. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Faulty vehicle speed sensor
- Dirty throttle body or idle air control valve
- Faulty switch or sensor
- Damaged wiring or connector
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does P0583 mean?
P0583 means “Cruise Control Vacuum Control Circuit Low”. It belongs to the speed, idle control and inputs group: The engine computer has found a problem with vehicle speed signals, idle control or another sensor input.
Is it safe to drive with P0583?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear P0583?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- P0579Cruise Control Multi-Function Input A Circuit Range/Performance
- P0580Cruise Control Multi-Function Input A Circuit Low
- P0581Cruise Control Multi-Function Input A Circuit High
- P0582Cruise Control Vacuum Control Circuit /Open
- P0584Cruise Control Vacuum Control Circuit High
- P0585Cruise Control Multi-Function Input A/B Correlation
- P0586Cruise Control Vent Control Circuit/Open
- P0587Cruise Control Vent Control Circuit Low
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.