OBD2 Car ScannerWhat does B2112 mean?
B2112 stands for Door Driver Set Switch Stuck Failure. A body control module has found a fault in a comfort or safety system such as airbags, lights, doors, seats or climate control.
Body codes cover the airbags, seats, lights, doors and comfort systems. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Damaged wiring or a loose connector (often under seats)
- Faulty switch, sensor or motor
- Low battery voltage
- Faulty body control module
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does B2112 mean?
B2112 means “Door Driver Set Switch Stuck Failure”. It belongs to the body system group: A body control module has found a fault in a comfort or safety system such as airbags, lights, doors, seats or climate control.
Is it safe to drive with B2112?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear B2112?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- B2108Trunk Key Cylinder Switch Failure
- B2109Heated Wind Shield Relay Short to Vbatt (changed from Failure 2/6/97)
- B2110Front Wiper Motor Relay Circuit Open (changed from Failure 2/6/97)
- B2111All Door Lock Input Short to Ground
- B2113Heated Windshield Input Short to Ground
- B2114Front Washer Input Short to Ground
- B2115Rear Washer Input Short to Ground
- B2116Door Driver Reset Switch Stuck Failure
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.