OBD2 Car ScannerWhat does B00D2 mean?
B00D2 stands for Restraint System Malfunction Indicator 1 (Subfault). A body control module has found a fault in a comfort or safety system such as airbags, lights, doors, seats or climate control.
Body codes cover the airbags, seats, lights, doors and comfort systems. When the car's computer sees a reading outside its normal range, it stores this code and may turn on a warning light on the dashboard.
Common causes
- Damaged wiring or a loose connector (often under seats)
- Faulty switch, sensor or motor
- Low battery voltage
- Faulty body control module
What to do
- Read all stored and pending codes with a scanner. Several codes together often point to one cause.
- Note the freeze frame data (speed, temperature, load) recorded when the code was set.
- Inspect the wiring and connectors of the part named in the code for damage, corrosion or looseness.
- Fix the most likely and cheapest cause first, then clear the code and drive to see if it comes back.
Read this code from your own car
Plug in a cheap ELM327 adapter and the app shows every fault code, what it means and how to fix it.
Frequently asked questions
What does B00D2 mean?
B00D2 means “Restraint System Malfunction Indicator 1 (Subfault)”. It belongs to the body system group: A body control module has found a fault in a comfort or safety system such as airbags, lights, doors, seats or climate control.
Is it safe to drive with B00D2?
You can usually drive carefully for a short time, but fix it soon to avoid further damage or higher fuel use.
How do I clear B00D2?
Fix the cause, then clear the code with an OBD2 scanner or app. If the fault is still there, the code will come back.
Related codes
- B00CAPassenger Seat Occupant Position Sensor "D" (Subfault)
- B00CBPassenger Seat Occupant Position Sensor "E" (Subfault)
- B00D0Driver Seatbelt Indicator (Subfault)
- B00D1Passenger Seatbelt Indicator (Subfault)
- B00D3Restraint System Malfunction Indicator 2 (Subfault)
- B00D4Restraint System Malfunction Audible Indicator (Subfault)
- B00D5Restraint System Passenger Disable Indicator (Subfault)
- B00DFPassenger Restraints Disable Switch (Subfault)
Code meanings can vary by manufacturer. This page is general guidance, not a repair manual. Always confirm the cause before replacing parts.